baja3
New Member
Posts: 2
|
Post by baja3 on Jan 15, 2007 11:12:04 GMT -5
I am looking for a sea worthy panga, new or used, 800 lbs or less, 18' to 22'. Will power it with a 60 hp 4 stroke Merc. The 4 stroke weighs 280 lbs, total weight boat and motor, must be less than 1050lbs. The weight is important becuase the bridge of a boat which it will serve is 15 ' above the water and the righting characteristics of that boat will not allow more weight. The primary use of the panga wil be to fish 4 persons in open water. (Sea Of Cortez) Don' t care about center console or floor, just a good old tiller fish killer. Any advise?
|
|
jack
New Member
Posts: 39
|
Post by jack on Jan 16, 2007 9:39:44 GMT -5
locally, i'd look at these 2 because they are both based on the yamaha jap wasen hull with the delta pad lifting plane contact for their mex dealer eduardono makes the panga.com hull TEL: (574) 2664055 FAX: (574) 2664582 ADDRESS: CRA. 48 No. 14-68 MEDELLIN, COLOMBIA www.eduardono.comand www.imemsa.com.mx/if you cant speak spanish copy and put into google search then click translate in the results as well as the traditional mex panga from amanto www.geocities.com/amatoboats/amatopicsn.htmlthose 3 will give you a good idea of whats available and you can choose what one you think will serve you best panga marine has an 18' Niente that is a bit fatter [same beam as their 22'] if that is what you are looking for
|
|
baja3
New Member
Posts: 2
|
Post by baja3 on Jan 17, 2007 0:17:27 GMT -5
Thanks for the info.
|
|